IT integrator and supplier of IT equipment in Turkey

Mounting of SCS

Replacement of a cross connect cabinet for REHAU company

The task was to replace the cross-connect cabinet with a smaller cabinet, transfer and organize the correct wiring and equipment placement in the new cabinet. Due to the large size of the old cross-connect cabinet and its unfortunate location, as well as due to inaccurate laying of the wire inside the cabinet, the customer experienced malfunctions in the operation of this switching unit. In the process of solving this problem, we installed and transferred the equipment of the old cabinet to a new cross-connect cabinet that is more compact. A router is installed and wire and patch cords are laid with the help of cable organizers. The work was done after the end of the working hours of the office staff, so as not to interrupt the work process during the day.

Meeting rooms equipment

Complex equipment of meeting rooms for “Generium”

For the company "Generium", which is our customer, our company has made a complex equipment of meeting rooms in the office and in production. Poly equipment (сamera, microphone, videoconferencing session control panel) was used as the central equipment for the videoconferencing. Kramer equipment was used as switching equipment. All multimedia devices are controlled by Kramer panels, which are installed in each meeting room. For the convenience of connecting laptops, we have provided architectural hatches in the tables. Also in some rooms, we solved the problem of eliminating sound defects in the room using acoustic treatment of walls and columns. At the entrance to each meeting room, we installed an Evoko reservation panel. Any employee of the company can book a meeting room either using the outlook mail service or manually on the panel itself.

Equipping a conference-room

Equipping a conference room for “Generium” company

The task was to modernize the conference hall. We offered a solution based on the Bosch congress system, 4 Sony videoconferencing cameras, 4 monitors in the center of the hall. All information from the sources is displayed on a laser projector with a brightness of 9500 lm. We also developed a solution for controlling light and climate in the hall based on HDL equipment. Management of these systems, as well as multimedia systems, is carried out using the Kramer panel on the operator's table.

Equipment installation

Installing video and audio equipment in the classroom for "Generium" company

For the “Generium” company, which is our customer, our company has equipped the classroom with video and audio equipment. Also, after a preliminary acoustic calculation of the room, we mounted acoustic panels on the walls and columns, which significantly improved the sound characteristics of the room. A projector and a motorized screen are used as a display system. High-quality sound is achieved using six wall-mounted speakers and a passive subwoofer. For convenience, a BOOCO booking panel was installed at the entrance.

Equipment installation

Equipping of the school assembly hall

In the frames of the complex equipment of the assembly hall, our company carried out the supply, installation and configuration of multimedia equipment, as well as the supply of chairs and motorized backstage. As for the equipment, the Behringer X32 digital mixing console should be paid attention, it allows the sound engineer to create various musical compositions in dynamic mode, depending on the situation on the stage.

Equipment installation

Video walls installation

There was a task to replace outdated video wall panels by the new Samsung 46 vm46t. The difficulty was that it was possible to work only at night, so as not to disturb the broadcast of the TV channel. We also provided a new bracket for the 9x1 video wall, which is attached to the ceiling with chains.

Mounting of SCS

Replacement of a cross connect cabinet for REHAU company

The task was to replace the cross-connect cabinet with a smaller cabinet, transfer and organize the correct wiring and equipment placement in the new cabinet. Due to the large size of the old cross-connect cabinet and its unfortunate location, as well as due to inaccurate laying of the wire inside the cabinet, the customer experienced malfunctions in the operation of this switching unit. In the process of solving this problem, we installed and transferred the equipment of the old cabinet to a new cross-connect cabinet that is more compact. A router is installed and wire and patch cords are laid with the help of cable organizers. The work was done after the end of the working hours of the office staff, so as not to interrupt the work process during the day.

Meeting rooms equipment

Complex equipment of meeting rooms for “Generium”

For the company "Generium", which is our customer, our company has made a complex equipment of meeting rooms in the office and in production. Poly equipment (сamera, microphone, videoconferencing session control panel) was used as the central equipment for the videoconferencing. Kramer equipment was used as switching equipment. All multimedia devices are controlled by Kramer panels, which are installed in each meeting room. For the convenience of connecting laptops, we have provided architectural hatches in the tables. Also in some rooms, we solved the problem of eliminating sound defects in the room using acoustic treatment of walls and columns. At the entrance to each meeting room, we installed an Evoko reservation panel. Any employee of the company can book a meeting room either using the outlook mail service or manually on the panel itself.

Equipping a conference-room

Equipping a conference room for “Generium” company

The task was to modernize the conference hall. We offered a solution based on the Bosch congress system, 4 Sony videoconferencing cameras, 4 monitors in the center of the hall. All information from the sources is displayed on a laser projector with a brightness of 9500 lm. We also developed a solution for controlling light and climate in the hall based on HDL equipment. Management of these systems, as well as multimedia systems, is carried out using the Kramer panel on the operator's table.

Equipment installation

Installing video and audio equipment in the classroom for "Generium" company

For the “Generium” company, which is our customer, our company has equipped the classroom with video and audio equipment. Also, after a preliminary acoustic calculation of the room, we mounted acoustic panels on the walls and columns, which significantly improved the sound characteristics of the room. A projector and a motorized screen are used as a display system. High-quality sound is achieved using six wall-mounted speakers and a passive subwoofer. For convenience, a BOOCO booking panel was installed at the entrance.

Equipment installation

Equipping of the school assembly hall

In the frames of the complex equipment of the assembly hall, our company carried out the supply, installation and configuration of multimedia equipment, as well as the supply of chairs and motorized backstage. As for the equipment, the Behringer X32 digital mixing console should be paid attention, it allows the sound engineer to create various musical compositions in dynamic mode, depending on the situation on the stage.

Equipment installation

Video walls installation

There was a task to replace outdated video wall panels by the new Samsung 46 vm46t. The difficulty was that it was possible to work only at night, so as not to disturb the broadcast of the TV channel. We also provided a new bracket for the 9x1 video wall, which is attached to the ceiling with chains.

Mounting of SCS

Replacement of a cross connect cabinet for REHAU company

The task was to replace the cross-connect cabinet with a smaller cabinet, transfer and organize the correct wiring and equipment placement in the new cabinet. Due to the large size of the old cross-connect cabinet and its unfortunate location, as well as due to inaccurate laying of the wire inside the cabinet, the customer experienced malfunctions in the operation of this switching unit. In the process of solving this problem, we installed and transferred the equipment of the old cabinet to a new cross-connect cabinet that is more compact. A router is installed and wire and patch cords are laid with the help of cable organizers. The work was done after the end of the working hours of the office staff, so as not to interrupt the work process during the day.

IT integrator and supplier of IT equipment

Why to choose us?

Professionally

Profitably

Reliably

Safely

Our focuses

IT services

Equipment

Software

Extended Warranty

About us

Figures about us

Years

Vendors

Clients

Projects

Most popular services

IT Outsourcing

Audits and surveys

Physical Access Control System

Our projects

Replacement of a cross connect cabinet for REHAU company

Complex equipment of meeting rooms for “Generium”

Equipping a conference room for “Generium” company

Installing video and audio equipment in the classroom for "Generium" company

Equipping of the school assembly hall

Video walls installation

Replacement of a cross connect cabinet for REHAU company

Complex equipment of meeting rooms for “Generium”

Equipping a conference room for “Generium” company

Installing video and audio equipment in the classroom for "Generium" company

Equipping of the school assembly hall

Video walls installation

Replacement of a cross connect cabinet for REHAU company

Our partners

Contact us

Services

Our company